 |
•
Sandusky spot welds the inside corners of each door providing a more rigid
door. • Each door also includes a welded full length door stiffener. • Felt pads protect the painted surface and assure quiet closure. |
 |
• Sandusky provides a user friendly adjustable shelf clip. Four shelf clips are positioned at the front and back edges of the shelves, relieving stress from the sides. Shelves adjust easily at 2" increments. |
 |
Permits you to move your Transport Series Cabinet easily. Attaches to either side of a 24" deep cabinet using bolts/nuts provided. Additional backer support plate attaches to the inside for maximum support. Holes must be drilled in cabinet to attach handle. Baked enamel finish. Item# TSH-00 - optional |
 |
•
Casters mount to a 6" wide full depth plate that bolts through the cabinet
bottom into 1 1/4" angle iron that runs the width of the cabinet, front
and back. All interior bolts and angle iron are concealed from view by a
false bottom shelf. (U.S. Patent No. 5980008) • Swivel polypropylene casters. Overall caster height is 5", 2 have side brake locks, 4" wheel diameter, 1 1/4" wheel width. Each caster holds 300 lbs. • Heavy gauge steel top plate attached to a full-drawn steel horn with integral, hardened raceways. • Load bearings - two full independent rows of hardened, polished ball-bearings roll freely in large diameter, lubricated raceways. • Finish is corrosion resistant zinc. |
 |
• Full
depth 11 gauge metal plate is 6" wide and 1/8" thick. • 90°, 1/2" full depth break for additional strength. • Finish is galvanized steel. • 11 gauge 1 1/4" x 1 1/4" x 1/8" angle iron. • Fastening bolts are 5/16" x 1 3/16" hex head, grade 5 with flat washers and locking nuts. |
 |
Shelf weight capacity varies by shelf width. Weights should be evenly dispersed over entire shelf. |